Language:

OTHER ACCESORIES

Home » Products » Complementary products » OTHER ACCESORIES
Producent farb jachtowych
OTHER ACCESORIES


CORK SANDING BLOCK

Uzupełniające akcesoria lakiernicze klocek korkowySanding block made from natural cork. One side is designed to work as effectively as possible, the other is adapted for convenient handing.


Size: 25 x 60 x 105mm300003446

FOAM SANDING BLOCK

Uzupełniające akcesoria lakiernicze kolcek piankowyFoam sanding block made of four types of material, making it very light and yet has a high internal rigidity and increased strength.


Product has two working surfaces:

Size : 140 x 75 mm300003608
Size : 200 x 75 mm300003609
Size : 290 x 75 mm300003610

PLASTIC SANDING BLOCK

Uzupełniające akcesoria lakiernicze kolcek plastikowyGrinding block with grips for abrasive paper.


Size : 165 x 87 mm300000388
Size : 212 x 105 mm300003154

PROTECTIVE FOIL

Uzupełniające akcesoria lakiernicze folia ochronnaPE-HD protective foil, protects from paint, dust and moisture, necessary during lacquering works.


4 x 5 m UNIWERSALNA300005703
4 x 5 m 0,007 mm300001981

PAPER TOWEL (ROLL)

Uzupełniające akcesoria lakiernicze recznik papierowy rolkaPaper towel roll, white, two-ply, made from pure cellulose – 208 m.


 208m300005703

ANTISTATIC RAGS

Uzupełniające akcesoria lakiernicze sciereczki antystatyczneAntistatic rags, dust-absorbent, to clean the dust and dirt from the surface to be painted. Product allowed  to the aqua and 2K systems. Keep in closed package. Don’t  use on the hot surfaces.


10 szt. – size 40 x 80 cm300003842

Share:

Do you have any questions?
We will respond as soon as possible
 
See also
Other products in this category

Our FAQ
Answers to frequently asked questions

Can I add more hardener to speed up the reaction?

Do not add more hardener, because after the base has cured, the remaining hardener will react with subsequent layers, which will be applied to the surface and cause defects. For the product to work properly, please follow the proportions given by the manufacturer.

Why despite the use of antifouing paint the bottom of the boat is overgrown?

Possible causes

  • Too thin layer of antifouling paint,
  • Choosing the wrong antifouling to type of a boat or yacht
  • Thinning of antifouling paint,
  • Incorrect surface preparation before antifouling application.

How to prevent

  • Apply the right layer thickness of paint indicated by manufacturer,
  • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
  • Do not thin antifouling because of the risk of reducing effectiveness,
  • Careful surface preparations (grinding, clearing, degreasing),

How to remove

  • Wet grinding, apply new layers of antifouling paint.
  • Use C1 shell and fouling remover.

Why the resin does not harden?

Possible causes

  • Too low temperature of ambitne,
  • Incorrect proportion of base and herdener,
  • Mixing two components from two different manufacturers

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during whole hardening process,
  • Mix the products thoroughly and bleed the mixture.

How to remove

  • The uncured mass requires complete removal from the surface.
Our offer
Familiarize yourself with our offer of boatbuilding materials and paints
Exit
Przewiń na górę