Lengua:

Warsow Yacht Salon

Página web » Noticias y promociones » Warsow Yacht Salon
Sea Line farby jachtowe
Warsow Yacht Salon

We would like to invite you to the Warsaw Yacht Salon and meet our representatives. This is an excellent opportunity to talk about possible options for yacht renovation or refit your boat. We also plan to conduct gelcoat and varnish polishing demonstrations during which we will answer all your questions. We have prepared discount coupons for all our guests, which can be used when shopping in the best yachting stores.

In addition, we will share information about new products that may surprise you a lot. How about choosing one of 17,000 colors for your boat?

The event takes place at Ptak Warsaw Expo on November 5-7. Our booth number is 5.113.


Compartir:

Ver también
Otros hilos de esta categoría

Nuestras FAQ
Respuestas a las preguntas más frecuentes

Why does the paint have no adhesion?

Possible causes

  • Wrong surface preparation,
  • Skipping the primer in the system application process,
  • Use of universal thinners or replacements ,
  • Paint incompatibility.

How to prevent

  • Correct surface preparation (grinding, clearing, degreasing),
  • Use primers which improve adhesion of paints,
  • Use thinners which are dedicated to each paints,
  • Use of paints which are compatible to each other.

How to remove

  • Grind, clean and paint again.

Can I paint a boat, previously painted with 1 component paint, with polyurethane?

No, polyurethane is a 2-component paint (base + hardener) and after applying 2-component paint to 1-component paint, the proper adhesion of the paint to the surface will not be maintained, the paint will begin to wrinkle and surface defects will appear.

Why are the streaks formed?

Possible causes

  • Wrong viscosity and spraying technique,
  • Failure to maintain proper evaporation time and thickness of layers,
  • Incorrect spraying pressure,
  • Too low temperature of varnish, surface or space ,
  • Wrong thinner or hardener.

How to prevent

  • Apply the right type of application method indicated by manufacturer,
  • Use working spray guns,
  • Both the object and material must have room temperature of 20ﹾC,
  • Apply correct proportion of base and hardener.

How to remove

  • Grinding and polishing,
  • Grinding and painting,
Nuestra oferta
Consulte nuestra oferta de materiales y pinturas para la construcción de embarcaciones
Exit
Przewiń na górę