PRODUCT DISCRIPTION:
Surfaces | GRP, laminates, steel, aluminum | |
Area | Above and below waterline | |
Function | Grounding Intercoating Filling Antiosmotic Anticorosive | |
Application | spray can | |
Theoretical coverage for 400 ml | 1-2 м2 | |
Number of coats | 2 – 4 | |
Pot life 20°C | 48 h | |
Time between layers without sanding | 5~10 minutes | |
Color (matt) | white | |
Pack | 400 ml | |
Code | 38758 |
Before triggering, shake can thoroughly for 2 minutes after agitation balls are heard.
Turn the can upside down and place on a firm surface.
Press the red pushbutton all the way in with the palm of your hand.
Set the adjustable spray nozzle to the size of the damage and damage pattern.
Standard application: approx. 2÷4 spray coats, recommended dry film layer: 80 ~200 μm
NOTICE: For antiosmosis and anticorrosion protection recommended DTF is 240 μm.
After painting, turn the can upside down and spray the valve until empty.
RUBAN SILVER RUBAN RUBAN une adhérence parfaite aux matières plastiques et les métaux. Supprort : papier à crêpage, colle : […]
Protéger le système respiratoire Gants en nitrile jetables « MASTER » Gants en nitrile jetables Vêtements de protection Vêtements de protection Coller […]
1-component chlorinated rubber primer Recommended above and under the water line It can be use on GRP, steel and wood […]
It is very important to use paint thinners, which provide the appropriate parameters of paint – flow, pot life, time […]
Primaire époxydique HS anti-osmose 3:2: Primaire époxydique bi-composant à couche épaisse de qualité élevée. Ne contient pas de dilutifs qui […]
Le dissolvant silicone est un produit destiné au nettoyage des surfaces avant de mettre la peinture vernis. Les impuretés telles […]
Sea-Line HARD and Sea-Line self-polishing antifouling are not intended for aluminum surfaces. They include copper oxide, which in contact with aluminum causes galvanic corrosion. Especially on aluminum, we offer ALU-PLUS self-polishing anti-fouling paint, which, in addition to excellent adhesion to aluminum, is also 30% more effective than traditional anti-fouling paints.
Sea-Line yacht paints are designed for painting the surface of boats and yachts made of various materials, e.g. laminate, wood or steel. We do not have a certificate of the National Institute of Hygiene, which would allow the use of yacht paint to paint the tank with drinking water.
There is a possibility of thinning antifouling, but we do not recommend this procedure due to the risk of reducing the effectiveness of the paint. If it is necessary to thin the antifouling paint, it is recommended to dilute it to a maximum of 0-5% (by volume).
Le produit destiné au remplissage des lacunes et à la liquidation des inégalités résultant des dommages ou des inégalités qui […]
La protection de la surface du bateau contre l’influence destructrice de l’osmose et de la corrosion dans des conditions difficiles
La protection contre l’eau et contre l’influence néfaste des rayons UV
La protection du fond du bateau contre l’encrassement par les algues et contre les coquillages. La protection contre l’eau
Une élimination efficace des fissures, le rafraîchissement de la couleur et du brillant du gel coat ou du vernis
Préparations spéciales pour le nettoyage et la remise en vigueur
Laminage, collage et de remplissage des fissures dans gelcoat
Beaucoup de produits utiles pour les travaux de construction d’un bateau