Language:

Epoxy resin NEW

Home » Products » Resins and repair kit » Epoxy resin NEW
Farby dla jachtów
Epoxy resin NEW


TypeLaminates, wood, steel, aluminum
PlaceAbove and below waterline
FunctionLaminating, repairs, reinforcement, gluing
ApplicationBrush, roll
ThinningNot recommended
 Theoretical coverage for 1kg

(for 1 layer laminate)

performance for layer of laminate based on glass fibre mats
300 g/m²

450 g/m²

~1,7 m²

~1,1 m²

performance for layer of laminate based on glass fabric (roving)
200 g/m²

400 g/m²

~5 m²

~2,5 m²

Coats numberDepend on needs
Pot life 23°C45 min
Hardening time7 h
ColorTransparente
Packcode
250 g –

500 g –

0,9 kg –

5,0 kg –

3636

8483

8508

8506 (comp. A) / 8507 (comp. B)

The resin is available in 3 sets:

Set of 250 g
-includes an epoxy resin with hardener, fabric glass (0,25 m 2), disposable gloves, a brush and a cup with a scale for easy dosing of ingredients and instructions for repair.
Set of 0,9 kg
-includes an epoxy resin with hardener

Set of 0,5 kg and 5,0 kg
-includes an epoxy resin with hardener


Share:

Do you have any questions?
We will respond as soon as possible
 
See also
Other products in this category

Our FAQ
Answers to frequently asked questions

Contamination in topcoat paint?

Possible causes

  • Inaccurate surface cleaning before paint application,
  • Incorrect painting tools preparation (brush and roll),
  • Performing work in a place exposed to constant contact with dust.

How to prevent

  • Careful surface preparation (grinding, clearing, degreasing),
  • Careful painting tools preparation before use,
  • Maintain clean work environment

How to remove

  • Grind, clean and paint again.

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.

Can I use universal thinner?

We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.

Our offer
Familiarize yourself with our offer of boatbuilding materials and paints
Exit
Przewiń na górę